Safety Notice

All electrical appliances must be used strictly in accordance with the following safety instructions:

• Use the device according to the instructions.
• Strictly observe the safety label, if present, and the relevant provisions.
• Always switch off the device if it is not used or unattended.
• Before connecting the device to the power mains, make sure that the electric system complies with the standards in force in the country of installation (e.g. earthing system and differential magnetothermal switch).
• Keep the work surface clean and avoid the presence of paper or flammable materials in the vicinity.
• Keep the power cable away from the heating surface.
• Make sure that the power cable is properly protected against mechanical influences (passage of persons, sharp objects, etc.), thermal influences (heat sources) or chemical influences (corrosive substances).
• Connect the device to a power outlet suitable for the power cable provided. If adapters are needed, check that they are properly sized (10A/16A).
• Before disconnecting the plug, always make sure that the device is switched off using the proper switch.
• Connect the device to the nearest outlet avoiding the use of extensions and power strips as much as possible.
• Disconnect the device from the mains before starting periodic cleaning.
• At the end of the day or work, always switch off the main power supply, if possible, and in any case disconnect the device from the mains.